Wheel Loader Tires for Quarries: 5 Best Practices to Cut Costs
Wheel loader tires for quarries: 5 best practices on tread choice, pressure, floor care and rotation that cut tire cost per hour.
Choosing wheel loader tires for quarries is about more than size. Quarry floors are full of sharp stone, and a loader spins and turns hundreds of times a shift. These five practices help tires last longer.
1. Pick the Right Tread Depth
For most quarries an L-3 rock tread works well. If you load blasted granite or basalt, an L-4 or L-5 deep tread pays for itself. Sizes 17.5-25, 20.5-25 and 23.5-25 cover most machines.
2. Keep the Loading Floor Clean
Loose rocks around the face and stockpile cause most cuts. A few minutes with the bucket each hour to clear spillage saves tires.
3. Check Pressure Every Morning
Under-inflated tires flex too much and heat up. Over-inflated tires cut more easily. Check cold pressures at the start of each shift and adjust to the maker’s chart.
4. Avoid Wheel Spin
Spinning tires on rock is the fastest way to strip a tread. Train operators to let the bucket do the work and to use a lower gear when digging.
5. Rotate and Match
Front tires on a loader wear faster. Swap front and rear at about half wear, and keep tires on the same axle within a few millimetres of tread depth.
Buying Wheel Loader Tires for Quarries
Bias tires suit short cycles on rough floors; radials pay back where the loader also travels. See 23.5-25 tires, 20.5-25 tires and wheel loader & dozer tires for options, and the quarry article for background on how sites operate.
Wheel loader tires for quarries: Frequently Asked Questions
How many hours should wheel loader tires last in a quarry?
It varies widely. A well-maintained L-3 tire on a clean quarry floor can reach several thousand hours, while the same tire on a messy face may be cut in a few hundred. Floor care, pressure and operator habits matter more than brand. Keep records to see where your tires are lost.
Should I use tire chains on quarry loaders?
Protection chains are worth considering on very sharp rock or in steel slag. They cost a lot upfront but can multiply tire life. For most aggregate quarries, a deep tread tire and good floor care give a better return than chains.
Is foam filling a good idea for quarry loaders?
Foam filling stops flats but adds weight and heat and makes the ride harsh. It is common on skid steers and small loaders in scrap yards, but rarely used on large quarry loaders, where air pressure is easier to manage.
What size loader tires do you export most?
For quarries, 17.5-25, 20.5-25 and 23.5-25 in bias, and 20.5R25, 23.5R25 and 26.5R25 in radial, are the most requested. We can mix these with truck tires in one container to lower freight per piece.
Get Expert Help With Wheel loader tires for quarries
Our export team has answered questions like this for buyers in Asia, Africa, the Middle East, Australia and the Americas for many years. Send your machine list, sizes and destination port, and we will reply with options, prices and freight within 24 hours. You can also browse the full tire catalogue or compare tire brands before you write.
OTR TIRE (THAILAND) CO., LTD. ships mixed containers from Laem Chabang to ports worldwide. Message us on WhatsApp +66 640 130 805 or email info@orttirethai.shop.
